EBN (ZNC) controller specification

• Auto Index has been introduced to the controlling system to be more user friendly. The new function allows the user to select the conditions (material of the work piece, depth, working area, etc.) in order to generate the sparking parameter.
• Sparking parameters (ON Time, OFF Time, Working Time, Jump Height, Jump Speed, etc.) are able to be adjusted during machining via FUZZY in order to improve the sparking efficiency and the quality of the final product.
• Color LCD. PC Base, 32bit Industrial Level Computer (IPC).
• Chinese / English and Inch / Metric Mode.
• The Spark Circuit Design includes MOS-FET high power transistor and High Speed POWER-SINK reduce electrode wear and increase working speed.
• Reduce electrode wear and increase working speed.
• Modules insert card design is used in power controller for easily maintain.
• Two groups of coordinates are both switchable and editable ; this helps user to set the reference point easier.
• Allow user to have the option of choosing absolute depth or relative depth based on the preference.
• Sparking parameter and depth input are displayed under the same mode for user to read easier.
• 200 lines of working conditions are provided in the system, user can select any block as start and ending line. In addition,the system can save up to 50 files.
• The Jog mode includes 3 functions, Jog, Feed and Protect / Unprotect switch. Regarding to the Jog and Feed function, Jog mode has 4 speeds (x5.x50.x250.x500μm) allow user to have the flexibility when adjusting the position of the workpiece and z-axis.
• The Z-Axis Alignment function can be operated without using Manual Edge Find so that the time for edge find is reduced.The value of current can be changed as needed.
• EDM allows the cutting process to be automatized, start from rough cut to fine finish.
• A standard EDM features the Z-Axis lock function allows to expand the orbiter.
• The system features the Center Find function which helps the user during alignment on a circular workpiece.
• The Z-axis features multiple kinds of slag tapping. This function is utilized based on various of machining such as deep machining, corner sharpening, machining at large area, machining on thin workpiece, tilt machining, etc.