HB 160T

HB 160T


The HB 160T is a T-Type morphology machine with n°2 separate and independent bed which are strongly linked by the rigid foundation. A huge number of foundation bolts and levelling units of BW Fixatoren, positioned every 500mm, are giving the best rigidity and levelling precision to the two beds.

The T-Type morphology advantages are!

Ergonomic Design:

  • Optimal visibility
  • Facilitated access and positioning of the pieces
  • Total exploitation of the working area
  • Max comfort for the operator

Modularity:

  • Table X travels up to X=6.000mm.
  • Headstock Y travels up to Y=3.500mm.
  • Column Z travels up to Z=3.000mm.
  • Spindle travel W=1.100mm.
  • Rotary Table surface from B=1.650×2.000mm load 30ton up to B=3.000×3.500mm load 50ton
  • Different possibility of personalization according to the customer’s request

Rigidity:

  • Very rigid design of the two beds
  • Compact design
  • Lowest distance from the floor
  • Spindle Headstock very close to the table center

Special design of the two beds for the perfect fitting between table and column bed:

  • Reducing the most the distance to the table center
  • Higher rigidity due to the best approach to the piece.

Floor design and installation of the machine in order to give:

  • Lowest cost of foundation
  • Highest comfort for the operator
  • High rigidity due to the low distance from spindle to foundation bolts

Extended Headstock Casting:

  • The Live Boring Spindle Ø160 travel W=1.100mm of the HB 160T overcome the table center of 435mm with table plate B=2.000×3.000 30ton
  • A UA 360 “GradoGrado” is overcoming the table center in both vertical and horizontal position

Boring and Milling Machine in One:

  • Maximum universality
  • Highest productivity
  • Possibility to work the 5 faces of the pieces with one setup
TEKNİK ÖZELLİKLER:  PDF HB 160T  HB 160TP 
 
Maks. Dikey alan mm. 3.500 3.500
evrensel kafa ile mm. 3.750 3.750
 
Spindle      
Ø Spindle mm. 150 – 160 150 – 160
Spindle konikliği ISO 50 – Big Plus 50 – Big Plus
Maks spindle hızı RPM 4.000 4.000
Motor Maks. Gücü kW 70 70
 
HAREKET      
Spindle- W mm. 1.100 1.100
Dikey kafa - Y mm. 2.000 ÷ 3.500 2.000 ÷ 3.500
Çapraz hareketli kafa - X mm. 3.000 ÷ 6.000 3.000 ÷ 6.000
Boyuna kolon - Z mm. 1.500 ÷ 3.000 1.500 ÷ 3.000
 
DÖNER TABLA       
Minimum tabla yüzeyi – B mm. 1.650 x 2.000 2.500 x 2.500
Maksimum tabla yüzeyi – B mm. 2.500 x 3.000 3.000 x 3.500
Maks. Kabul edilebilinir yük Ton. 30 50
 
İLERLEMELER      
Çalışma mm./1′ 7.500 7.500
Boşta mm./1′ 15.000 12.000
B Eksen RPM 2 1,5
 
Min. Net ağırlık Ton. 42 54

 

CNC takım tezgahları konusunda uzman kadro ve tecrübemizle müşterilerimize hizmet vermekteyiz. Bize Ulaşın