HB 150T

The HB 150T is a T-Type morphology machine with n°2 separate and independent bed which are strongly linked by the rigid foundation. A huge number of foundation bolts and levelling units of BW Fixatoren, positioned every 500mm, are giving the best rigidity and levelling precision to the two beds.

The T-Type morphology advantages are!

Ergonomic Design:

• Optimal visibility
• Facilitated access and positioning of the pieces
• Total exploitation of the working area
• Max comfort for the operator

Modularity:

• Table X travels up to X=6.000mm.
• Headstock Y travels up to Y=3.100mm.
• Column Z travels up to Z=3.000mm.
• Spindle travel W=900mm.
• Rotary Table surface from B=1.600×2.000mm load 15ton up to B=2.000×3.000mm load 30ton
• Different possibility of personalization according to the customer’s request

Rigidity:

• Very rigid design of the two beds
• Compact design
• Lowest distance from the floor
• Spindle Headstock very close to the table center

Special design of the two beds for the perfect fitting between table and column bed:

• Reducing the most the distance to the table center
• Higher rigidity due to the best approach to the piece.

Floor design and installation of the machine in order to give:

• Lowest cost of foundation
• Highest comfort for the operator
• High rigidity due to the low distance from spindle to foundation bolts

Extended Headstock Casting:

• The Live Boring Spindle Ø150 travel W=900mm of the HB 150T overcome the table center of 225mm with table plate B=2.000×3.000 30ton
• A UA 360 “GradoGrado” is overcoming the table center in both vertical and horizontal position

Boring and Milling Machine in One:

• Maximum universality
• Highest productivity
• Possibility to work the 5 faces of the pieces with one setup